This article will be used to summarize the information related to Emersive Network components and popular NZ ISPs and VoIP providers.
Recommended approach as well as general information will be provided.
Please use comments for requests and updates. Sharing your local knowledge here will be highly appreciated.
|ISP/VoIP||Conn. Type||Auth.||VLAN Tag||VoIP||Notes||Approach|
|Spark||PPPoE||No||10||Connect phones directly to ONT|
|Orcon||DHCP||No||10||**||I-net connectivity provided by Emersive Router, Phone service is provided by RGW|
|2Degrees||PPPoE||Yes||10||3d party appliance required for VoIP||Cisco SPA112|
|Vodafone||DHCP||No||10||**||I-net connectivity provided by Emersive Router, Phone service is provided by RGW|
|2Talk||DHCP||Yes||-||3d party appliance required for VoIP||Cisco SPA112|
- ISP provided router/modem.
** Tagged VLAN 10 should be created and assigned on LAN interface of Emersive router ( eth2/re2)
to accommodatedevices provided by ISP.
RGW should be connected directly to ONT for ISP to troubleshoot any the VoIP or connectivity issues.
Once troubleshooting is completed the device can be reconnected to port 2(LAN) on Emersive router to restore normal operation.
Cisco SPA112***- Appliance required to enable phone service